Log Cabin The Twinskin Caterham Pavilion

Pavilion Specification

The specification below will comply with UK building regulations for a heated building to be used all year round

Log Cabin Dimensions

• Outer wall log thickness : 45mm
• Insulated wall cavity : 50mm or 90mm
• Inner wall log thickness : 45mm
• Insulation thickness in ceiling : Up to 180mm
• Insulation thickness in floor : 45mm or 95mm
• 13.4m overall pavilion width
• 6.5m overall pavilion depth including verandah area
• Minimum base width required : 13.20 m
• Minimum base depth required : 6.30 m
• Wall height : 2.3 m
• Ridge height : 3.8 m
• T&G roof board thickness : 19 mm
• T&G floor board thickness : 19mm

Also Included With This Pavilion

• House quality, tilt & turn, multipoint locking, double glazed single windows with toughened glass 1230x710mm : 4
• House quality, tilt & turn, multipoint locking, double glazed double windows with toughened glass 1365x980mm : 4
• House quality, multipoint locking, double glazed double doors, half glazed with toughened glass 1855x1565mm : 1
• Fully boarded single doors 1855x850mm : 7
• Tanalised floor bearers : included
• Internal partition : supplied
• Full width verandah with balustrading

This log cabin pavilion is made to customers requirements and can therefore be made to any size, with or without internal partitions, and can be used for a cricket pavilion, tennis pavilion, football clubhouse, athletics changing rooms, sports halls and many other uses.

The specification above is for a Twinskin wall construction, so not only will it meet building regs for strength but also for thermal efficiency, which will be a requirement if the cabin is to be heated and used all year round.